
RETROFIT FITTINGS
Retrofit Fitting S Series
The Retrofit S Series is used for internal, one-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in singlewall sumps. Retrofit S fitting kits are universal for round or flat sump walls and the split design doesn’t require excavation or disconnecting pipe. Models available for size-over-size, coaxial FRP, & rigid conduit. Quality FRP construction provides long term compliance solutions.
- No need to break concrete or disconnect pipe
- For flat or round walls
- Accommodates extreme angles
- 30-year corrosion warranty
- UL 2447 listed

Retrofit Split FRP Retrofit Entry Fittings for Rigid Pipe,
Round or Flat Singlewall FRP Sumps (RF EPOXY REQ’D)
Pipe Type | Part # | Description | RF EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
1/2" conduit 5" flange | RF-05-01-U | 1/2" conduit split, round or flat sump wall | EP100RF | 5" |
3/4" conduit 5" flange | RF-07-01-U | 3/4" conduit split, round or flat sump wall | EP100RF | 5" |
1" conduit 5" flange | RF-10-01-U | 1" conduit split, round or flat sump wall | EP100RF | 5" |
1/2" conduit 5" flange | RF-05-02-U | 1/2" conduit, round or flat sump wall | EP100RF | 5" |
3/4" conduit 7" flange | RF-07-02-U | 3/4" conduit 7" flange, split, round or flat sump wa | EP100RF | 7" |
1" conduit 7" flange | RF-10-02-U | 1" conduit 7" flange, split, round or flat sump wall | EP100RF | 7" |
2" FRP 7" flange | RF-20-01-U | 2" FRP 7" flange, split, round or flat sump wall | EP100RF (X2) | 7" |
3" FRP 7" flange | RF-30-01-U | 3" FRP 7" flange, split, round or flat sump wall | EP100RF (X2) | 7" |
4" FRP 8" flange | RF-40-01-U | 4" FRP 8" flange, split, round or flat sump wall | EP100RF (X2) | 8" |
6" FRP 11" flange | RF-60-01-U | 6" FRP 11" flange, split, round or flat sump wall | EP100RF (X4) | 11" |
2" FRP 9" flange | RF-20-02-U | 2" FRP 9" flange, split, round or flat sump wall | EP100RF (X2) | 9" |
3" FRP 9" flange | RF-30-02-U | 3" FRP 9" flange, split, round or flat sump wall | EP100RF (X2) | 9" |
2" LCX 7" flange | RF-20L-01-U | 2" LCX 7" flange, split, round or flat sump wall | EP100RF (X2) | 7" |
3" LCX 7" flange | RF-30L-01-U | 3" LCX 7" flange, split, round or flat sump wall | EP100RF (X2) | 7" |
4" LCX 8" flange | RF-40L-01-U | 4" LCX 8" flange, split, round or flat sump wall | EP100RF (X2) | 8" |
2" LCX 9" flange | RF-20L-02-U | 2" LCX 9" flange, split, round or flat sump wall | EP100RF (X2) | 9' |
3" LCX 9" flange | RF-30L-02-U | 3" LCX 9" flange, split, round or flat sump wall | EP100RF (X2) | 9" |
RETROFIT FITTINGS
Retrofit Fitting RLX Series
The RLX Series is used for internal, one-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in singlewall sumps. RLX fitting kits are universal for round or flat sump walls and the split design doesn’t require excavation or disconnecting pipe. Models available for all common flex pipe and semi-rigid piping. Quality FRP construction provides long term compliance solutions.
- No need to break concrete or disconnect pipe
- For flat or round walls
- Accommodates extreme angles
- 3-year warranty
- Included FRP sleeve seals to plastic piping, plastic adhesive required
- UL 2447 listed

RLX Series Split FRP Retrofit Entry Fittings for Flex Pipe, Round or Flat Singlewall FRP Sump; RF Epoxy, Plastic Adhesives Required; see Flex Pipe ID chart
Pipe Type | Part # | Description | RF EPOXY REQ'D Qty | PLASTIC ADHESIVE REQ'D | A |
---|---|---|---|---|---|
3/4" coaxial flex pipe | RLX-1.0-01-U | 3/4" coaxial flex pipe, split, round or flat sump wall | EP100RF | 35ml | 5" |
1" coaxial flex pipe | RLX-1.4-01-U | 3/4" coaxial flex pipe, split, round or flat sump wall | EP100RF | 35ml | 5" |
1.5" coaxial flex pipe | RLX-2.0-01-U | 3/4" coaxial flex pipe, split, round or flat sump wall | EP100RF(X2) | 50ml | 7" |
1.75" coaxial flex pipe | RLX-2.2-01-U | 1.75" coaxial flex pipe, split, round or flat sump wall | EP100RF(X2) | 50ml | 7" |
2" coaxial flex pipe | RLX-2.5-01-U | 2" coaxial flex pipe, split, round or flat sump wall | EP100RF(X2) | 65ml | 7" |
2" coaxial flex pipe | RLX-2.7-01-U | 2" coaxial flex pipe, split, round or flat sump wall | EP100RF(X2) | 65ml | 7" |
1.5" coaxial flex pipe | RLX-2.0-02-U | 1.5" coaxial flex pipe, split, round or flat sump wall | EP100RF(X2) | 50ml | 9" |
1.75" coaxial flex pipe | RLX-2.2-02-U | 1.75" coaxial flex pipe, split, round or flat sump wall | EP100RF(X2) | 50ml | 9" |
2" coaxial flex pipe | RLX-2.5-02-U | 2" coaxial flex pipe, split, round or flat sump wall | EP100RF(X2) | 65ml | 9" |
2" coaxial flex pipe | RLX-2.7-02-U | 2" coaxial flex pipe, split, round or flat sump wall | EP100RF(X2) | 65ml | 9" |
50mm O.D PE pipe | RLX-50-01-U | 50mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 50ml | 7" |
63mm O.D PE pipe | RLX-63-01-U | 63mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 65ml | 7" |
75mm O.D PE pipe | RLX-75-01-U | 70mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 65ml | 7" |
90mm O.D PE pipe | RLX-90-01-U | 90mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 85ml | 7" |
110mm O.D PE pipe | RLX-110-01-U | 110mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 85ml | 8" |
120mm O.D duct | RLX-120-01-U | 120mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 85ml | 8" |
125mm O.D PE pipe | RLX-125-01-U | 125mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 100ml | 8" |
60mm O.D PE pipe | RLX-160-01-U | 160mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 100ml | 12" |
50mm O.D PE pipe | RLX-50-02-U | 50mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 50ml | 9" |
63mm O.D PE pipe | RLX-63-02-U | 63mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 65ml | 9" |
75mm O.D PE pipe | RLX-75-02-U | 75mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 65ml | 9" |
90mm O.D PE pipe | RLX-90-02-U | 90mm O.D pipe, split, round or flat sump wall | EP100RF(X2) | 85ml | 9" |
Part # | Description |
---|---|
EP100RF | 7 oz. can Bravo retrofit epoxy; use with PVDF pipe |
PE-250 | 250ml polyethylene adhesive cartridge; use for poly pipe and poly sump walls; gun required |
NY-260 | 260ml nylon adhesive kit; use with nylon pipe; no gun required |
WB-01 | 50ml 20 X expanding water-blocking foam, single cartridge; gun required |
WB-20 | 50ml 20 X expanding water-blocking foam, case of 20 cartridges; gun required |
WB-G | Water-blocking foam dispensing gun |
T-MG400 | 250ml - 400ml dual cartridge dispensing gun; use with PE-250 cartridge |
RETROFIT FITTINGS
Retrofit Fitting Studded Direct Replacement
Bravo studded direct replacement retrofits are used for internal, one-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in polyethylene or FRP sumps. This series for flat sump walls with existing studded entry boots. The split design doesn’t require excavation or disconnecting pipe. Models available for size over size, coaxial FRP, rigid conduit, & flexible piping. Quality FRP construction provides long term compliance solutions.
- No need for excavation or cutting pipe
- Eliminates rubber boots
- Attaches to existing studs
- All common coaxial flex pipes
- Can be used on poly sumps
- Offset application available
- 3-year warranty
- UL 2447 listed

Direct replacement Studded FRP Retrofit Entry Fitting – Polyethylene or FRP Flat-Sided Sumps; Rigid and Flexible Piping Models; RF EPOXY/PLAS ADH REQ’D; See Flex-Pipe ID Chart for selection
Pipe Type | Part # | Description | RF EPOXY REQ'D Qty | Bolt pattern | Pipe adhesive | Wall adhesive |
---|---|---|---|---|---|---|
3/4" conduit | RF-07-04BS | 3/4" conduit pipe, studded-direct replacement split | EP100RF | 4 bolt small | NA | 50ml |
3/4" conduit | RF-07-04B0 | 3/4" conduit pipe, studded-direct replacement split | EP100RF | 4bolt | NA | 50ml |
3/4" conduit | RF-07-04BL | 3/4" conduit pipe, studded-direct replacement split | EP100RF | 4 bolt large | NA | 50ml |
1" conduit | RF-10-04BS | 1" conduit pipe, studded-direct replacement split | EP100RF | 4 bolt small | NA | 50ml |
1" conduit | RF-10-04B0 | 1" conduit pipe, studded-direct replacement split | EP100RF | 4bolt | NA | 50ml |
1" conduit | RF-10-04BL | 1" conduit pipe, studded-direct replacement split | EP100RF | 4 bolt large | NA | 50ml |
2" FRP | RF-20-08BS | 2" FRP pipe, studded-direct replacement split | EP100RF(X2) | 8 bolt small | NA | 65ml |
2" FRP | RF-20-08B0 | 2" FRP pipe, studded-direct replacement split | EP100RF(X2) | 8 bolt | NA | 65ml |
3" FRP | RF-30-08BS | 3" FRP pipe, studded-direct replacement split | EP100RF(X2) | 8 bolt small | NA | 65ml |
3" FRP | RF-30-08B0 | 3" FRP pipe, studded-direct replacement split | EP100RF(X2) | 8 bolt | NA | 65ml |
3" FRP | RF-30-10BS | 3" FRP pipe, studded-direct replacement split | EP100RF(X2) | 10 bolt small | NA | 85ml |
3" FRP | RF-30-10B0 | 3" FRP pipe, studded-direct replacement split | EP100RF(X2) | 10 bolt | NA | 85ml |
4" FRP | RF-40-10BS | 4" FRP pipe, studded-direct replacement split | EP100RF(X2) | 10 bolt small | NA | 85ml |
4" FRP | RF-40-10B0 | 4" FRP pipe, studded-direct replacement split | EP100RF(X2) | 10 bolt | NA | 85ml |
1.5" coaxial flex pipe | RLX-2.0-08B0 | 1.5" coaxial flex pipe, studded-direct replacement split | EP100RF(X2) | 8 bolt | 50ml | 65ml |
1.75" coaxial flex pipe | RLX-2.2-08B0 | 1.75" coaxial flex pipe, studded-direct replacement split | EP100RF(X2) | 8 bolt | 50ml | 65ml |
2" coaxial flex pipe | RLX-2.5-08B0 | 2" coaxial flex pipe, studded-direct replacement split | EP100RF(X2) | 8 bolt | 65ml | 65ml |
Direct replacement Studded FRP Retrofit Entry Fitting – Polyethylene or FRP Flat-Sided Sumps; Rigid and Flexible Piping Models; RF EPOXY/PLAS ADH REQ’D; See Flex-Pipe ID Chart for selection
Pipe Type | Part # | Description | RF EPOXY REQ'D Qty | Bolt pattern | Pipe adhesive | Wall adhesive |
---|---|---|---|---|---|---|
2" 2.65" O.D coaxial flex pipe | RLX-2.7-08B0 | 2"/ 2.65" O.D ocoaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 8 bolt | 65ml | 65ml |
63mm O.D fusion, 8 bolt | RLX-63-08B0 | 63mm O.D fusion, 8 bolt, studded-direct replacement split | EP100RF(X2 | 8 bolt | 65ml | 65ml |
75mm O.D fusion, 8 bolt | RLX-75-08B0 | 75mm O.D fusion, 8 bolt, studded-direct replacement split | EP100RF(X2 | 8 bolt | 65ml | 65ml |
90mm O.D fusion, 8 bolt | RLX-90-08B0 | 90mm O.D fusion, 8 bolt, studded-direct replacement split | EP100RF(X2 | 8 bolt | 85ml | 65ml |
1.5" coaxial flex pipe | RLX-2.0-10B0 | 1.5" coaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 10 bolt | 50ml | 85ml |
1.75" coaxial flex pipe | RLX-2.2-10B0 | 1.75" coaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 10 bolt | 50ml | 85ml |
2" 2.5" O.D coaxial flex pipe | RLX-2.5-10B0 | 2"/ 2.5" O.D coaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 10 bolt | 65ml | 85ml |
2" 2.65" O.D coaxial flex pipe | RLX-2.7-10B0 | 2"/ 2.65" O.D coaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 10 bolt | 65ml | 85ml |
1.5" coaxial flex pipe | RLX-2.0-10BS | 1.5" coaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 10 bolt small | 50ml | 85ml |
1.75" coaxial flex pipe | RLX-2.2-10BS | 1.75" coaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 10 bolt small | 50ml | 85ml |
2" 2.5" O.D coaxial flex pipe | RLX-2.5-10BS | 2"/ 2.5" O.D coaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 10 bolt small | 65ml | 85ml |
2" 2.65" O.D coaxial flex pipe | RLX-2.7-10BS | 2"/ 2.65" O.D coaxial flex pipe, studded-direct replacement split | EP100RF(X2 | 10 bolt small | 65ml | 85ml |
63mm O.D fusion, 10 bolt | RLX-63-10B0 | 63mm O.D fusion, 8 bolt, studded-direct replacement split | EP100RF(X2 | 10 bolt | 65ml | 85ml |
75mm O.D fusion, 10 bolt | RLX-75-10B0 | 75mm O.D fusion, 8 bolt, studded-direct replacement split | EP100RF(X2 | 10 bolt | 65ml | 85ml |
90mm O.D fusion, 10 bolt | RLX-90-10B0 | 90mm O.D fusion, 8 bolt, studded-direct replacement split | EP100RF(X2 | 10 bolt | 85ml | 85ml |
Offset Flanges
Pipe Type | Part # | Description |
---|---|---|
3/4" conduit | R-07-04-OS | Offset flange; 3/4" conduit; 4B |
1" conduit | R-10-04-OS | Offset flange; 1" conduit; 4B |
2" FRP | R-20-08-OS | Offset flange; 2" FRP; 8B |
3" FRP | R-30-10-OS | Offset flange; 3" FRP; 10B |
1.5" Coaxial flex-pipe | RLX-2.0-10-OS | Offset flange; 1.5" flex; 10B |
1.75" Coaxial flex-pipe | RLX-2.2-10-OS | Offset flange; 1.75" flex; 10B |
2" Coaxial flex-pipe 2.5" O.D | RLX-2.5-10-OS | Offset flange; 2" flex; 10B |
2" Coaxial flex-pipe 2.65" O.D | RLX-2.7-10-OS | Offset flange; 2" 2.65 O.D flex; 10B |
Accessories and Tools
Part # | Description |
---|---|
EP100RF | Extra 7 oz. can Bravo retrofit epoxy; use with PVDF pipe |
PE-250 | 250ml polyethylene adhesive cartridge; use for poly pipe and poly sump walls; gun required |
NY-260 | 260ml nylon adhesive kit; use with nylon pipe; no gun required |
WB-01 | 50ml 20 X expanding water-blocking foam single cartridge; gun required |
WB-20 | 50ml 20 X expanding water-blocking foam, case of 20 cartridges; gun required |
WB-G | Water-blocking foam dispensing gun |
T-MG400 | 250ml - 400ml dual cartridge dispensing gun; use with PE-250 cartridge |
Direct Replacement Bolted Fittings | Complete Fitting | |||||
---|---|---|---|---|---|---|
Fitting | Size | ID (A) | OD (B) | Center hole to hole spacing (C) | Stud to Stud (D) | Profile Mounting Ring and Flange |
4 Bolt BS | Small | 1 13/20" | 3 1/2 | 2 1/2" | 1 3/4" | 2 5/8" |
4 Bolt B0 | Standard | 2 1/2" | 5" | 3 1/4" | 2 5/16" | 2 3/4" |
4 Bolt BL | Large | 2 1/2" | 5" | 3 1/2" | 2 15/32" | 2 3/4" |
8 Bolt BS | Small | 4" | 7" | 4 1/2" | 1 3/4" | 2 1/2" |
8 Bolt B0 | Standard | 4" | 7" | 5 1/4" | 2" | 2 1/2" |
10 Bolt BS | Small | 4 1/2 | 7" | 5 13/16" | 1 13/16" | 2 11/16" |
10 Bolt B0 | Standard | 5 5/8" | 8" | 6 3/4" | 2 1/16" | 2 11/16" |
RETROFIT FITTINGS
Retrofit Fittings Threaded (TCI) Direct Replacement
Bravo threaded direct replacement retrofits are used for internal, one-sided repairs to eliminate continuous leak points caused by degraded total containment flexible entry boots in polyethylene or FRP sumps. This series is for flat sump walls with existing TCI entry boots. The split design doesn’t require excavation or disconnecting pipe. Models available for size-over-size, coaxial FRP, rigid conduit, and flexible piping. Quality FRP construction provides long term
compliance solutions.
- No need for excavation or cutting pipe
- Eliminates rubber boots
- Attaches to existing TCI threads
- All common coaxial flex pipes
- Can be used on poly sumps
- Offset application available
- 3-year warranty
- UL 2447 listed

Direct replacement Threaded (TCI) FRP Retrofit Entry Fitting – Polyethylene or FRP FLAT SIDED Sumps; Rigid and Flexible Piping; RF EPOXY/PLAS ADH REQ’D; See Flex-pipe ID Chart for Selection
Pipe Type | Part # | # Description | RF EPOXY REQ'D Qty | Thread pitch | Pipe adhesive | Wall adhesive |
---|---|---|---|---|---|---|
3/4" conduit, UB0075 replacement | RF-07-UB0075 | 3/4" conduit, UB0075, split, threaded direct replacement, brass nut | EP100RF | Fine | NA | 50ml |
3/4" conduit, UB2000 replacement | RF-07-UB2000 | 3/4" conduit, UB2000, split, threaded direct replacement, brass nut | EP100RF | Fine | NA | 50ml |
1" conduit, UB0075 replacement | RF-10-UB0075 | 1" conduit, UB0075, split, threaded direct replacement, brass nut | EP100RF | Fine | NA | 50ml |
1" conduit, UB2000 replacement | RF-10-UB2000 | 1" conduit, UB2000, split, threaded direct replacement, brass nut | EP100RF | Fine | NA | 50ml |
3/4" conduit TCI replacement | RF-07-TCI-CT | 3/4" TCI repair, split, threaded direct replacement, plastic nut | EP100RF | Course | NA | 50ml |
1" conduit TCI replacement | RF-10-TCI-CT | 1" TCI repair, split, threaded direct replacement, plastic nut | EP100RF | Course | NA | 50ml |
2" FRP vapor penetration | RF-20-TCI-VP | 2" vapor penetration; split, threaded direct-replacment | EP100RF | Fine | NA | 65ml |
2" FRP course thread | RF-20-TCI-CT | 2" course thread, split, threaded direct replacement | EP100RF | Course | NA | 85ml |
3" FRP course thread | RF-30-TCI-CT | 3" course thread, split, threaded direct replacement | EP100RF (X2) | Course | NA | 85ml |
2" FRP fine thread | RF-20-TCI-FT | 2" course thread, split, threaded direct replacement | EP100RF (X2) | Fine | NA | 85ml |
3" FRP fine thread | RF-30-TCI-FT | 3" course thread, split, threaded direct replacement | EP100RF (X2) | Fine | NA | 85ml |
1.5" flex course thread | RLX-2.0-TCICT | 1.5" course thread, split, threaded direct replacement | EP100RF (X2) | Course | 50ml | 85ml |
2" 2.5" O.D flex course thread | RLX-2.5-TCICT | 2"/ 2.65" O.D flex course thread, split, threaded direct replacement | EP100RF (X2) | Course | 65ml | 85ml |
2" 2.65" O.D flex course thread | RLX-2.7-TCICT | 2"/ 2.65" O.D flex course thread, split, threaded direct replacement | EP100RF (X2) | Course | 65ml | 85ml |
1.5" flex fine thread | RLX-2.0-TCI-FT | 1.5" flex fine thread, split, threaded direct replacement | EP100RF (X2) | Fine | 50ml | 85ml |
2" 2.5" O.D flex fine thread | RLX-2.5-TCI-FT | 2"/ 2.5" flex fine thread, split, threaded direct replacement | EP100RF (X2) | Fine | 65ml | 85ml |
2" 2.65" O.D flex fine thread | RLX-2.7-TCI-FT | 2"/ 2.65" flex fine thread, split, threaded direct replacement | EP100RF (X2) | Fine | 65ml | 85ml |
63mm O.D fusion course thread | RLX-63-TCI-CT | 63mm O.D fusion course thread, split, threaded direct replacement | EP100RF (X2) | Course | 65ml | 85ml |
75mm O.D fusion course thread | RLX-75-TCI-CT | 75mm O.D fusion course thread, split, threaded direct replacement | EP100RF (X2) | Course | 65ml | 85ml |
90mm O.D fusion course thread | RLX-90-TCI-CT | 90mm O.D fusion course thread, split, threaded direct replacement | EP100RF (X2) | Course | 85ml | 85ml |
Accessories and Tools
Part # | Description |
---|---|
EP100RF | Extra 7 oz. can Bravo retrofit epoxy; use with PVDF pipe |
PE-250 | 250ml polyethylene adhesive cartridge; use for poly pipe and poly sump walls; gun required |
NY-260 | 260ml nylon adhesive kit; use with nylon pipe; no gun required |
WB-01 | 50ml 20 X expanding water-blocking foam single cartridge; gun required |
WB-20 | 50ml 20 X expanding water-blocking foam, case of 20 cartridges; gun required |
WB-G | Water-blocking foam dispensing gun |
T-MG400 | 250ml - 400ml dual cartridge dispensing gun; use with PE-250 cartridge |
RETROFIT FITTINGS
Retrofit Fitting SD-AB Series
The SD-AB Series is used for double-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in doublewall sumps. It repairs both interior and exterior leaks with excavation. The split design doesn’t require disconnecting pipe. Models available for all common FRP piping and rigid conduit. Quality FRP construction provides long term compliance solutions.
- Double-sided repair, excavation required
- Models available for flat or round walls
- 30-year warranty
- Installation corrects both interior and exterior wall leaks
- AB2481 compliant
- UL2447 Listed

Retrofit SD-AB Series Double-Sided Split FRP Retrofit Entry Fittings for Rigid Pipe
Flat Doublewall FRP Sumps (Excavation Required)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
1/2" conduit double-sided | RF-05-03-F | 1/2" conduit, double-sided split for flat doublewall sumps | EP100RF (X2) | 7" |
3/4" conduit double-sided | RF-07-03-F | 3/4" conduit, double-sided split for flat doublewall sumps | EP100RF (X2) | 7" |
1" conduit double-sided | RF-10-03-F | 1" conduit, double-sided split for flat doublewall sumps | EP100RF (X2) | 7" |
2" FRP double-sided | RF-20-03-F | 2" FRP double-sided split for flat doublewall sumps | EP100RF (X2) | 9" |
3" FRP double-sided | RF-30-03-F | 2" FRP double-sided split for round doublewall sumps | EP100RF (X4) | 9" |
4" FRP double-sided | RF-40-03-F | 4" FRP double-sided split for flat doublewall sumps | EP100RF (X4) | 9" |
2" LCX double-sided | RF-20L-03-F | 2" LCX double-sided split for flat doublewall sumps | EP100RF (X4) | 9" |
3" LCX double-sided | RF-30L-03-F | 3" LCX double-sided split for flat doublewall sumps | EP100RF (X4) | 9" |
Retrofit SD-AB Series Double-Sided Split FRP Retrofit Entry Fittings for Rigid Pipe
Round Doublewall FRP Sumps (Excavation Required)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | A |
---|---|---|---|---|
1/2" conduit double-sided | RF-05-03-R | 1/2" conduit, double-sided split for round doublewall sumps | EP100RF (X2) | 7" |
3/4" conduit double-sided | RF-07-03-R | 3/4" conduit, double-sided split for round doublewall sumps | EP100RF (X2) | 7" |
1" conduit double-sided | RF-10-03-R | 1" conduit, double-sided split for round doublewall sumps | EP100RF (X2) | 7" |
2" FRP double-sided | RF-20-03-R | 2" FRP double-sided split for round doublewall sumps | EP100RF (X2) | 9" |
3" FRP double-sided | RF-30-03-R | 3" FRP double-sided split for round doublewall sumps | EP100RF (X4) | 9" |
4" FRP double-sided | RF-40-03-R | 4" FRP double-sided split for round doublewall sumps | EP100RF (X4) | 9" |
2" LCX double-sided | RF-20L-03-R | 2" LCX double-sided split for round doublewall sumps | EP100RF (X4) | 9" |
3" LCX double-sided | RF-30L-03-R | 3" LCX double-sided split for round doublewall sumps | EP100RF (X4) | 9" |
RETROFIT FITTINGS
Retrofit Fitting RLX-SD-AB
The FLX-SD-AB Series is used for double-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in doublewall sumps. It repairs both interior and exterior leaks with excavation. The split design doesn’t require disconnecting pipe. Models available for all common flexible and semirigid piping. Quality FRP construction provides long term compliance solutions.
- Double-sided repair, excavation required
- Models available for flat or round walls
- 30-year warranty
- Installation corrects both interior and exterior wall leaks
- FRP sleeve seals to plastic piping
- AB2481 compliant
- UL2447 Listed

FLX-SD-AB Series Double-Sided Split FRP Retrofit Entry Fittings for
Flex-Pipe Flat Doublewall FRP Sumps (Excavation Required)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
1.5" flex double-sided | RLX-2.0-03-F | 1.5" flex double-sided split for flat doublewall sumps | EP100RF (X4) | 9" |
2" (2.5" O.D) flex doublesided | RLX-2.5-03-F | 2" 2.5" O.D flex, double-sided split for flat doublewall sumps | EP100RF (X4) | 9" |
2" (2.65" O.D) flex doublesided | RLX-2.7-03-F | 2" 2.65" O.D flex, double-sided split for flat doublewall sumps | EP100RF (X4) | 9" |
FLX-SD-AB Series Double-Sided Split FRP Retrofit Entry Fittings for
Flex-Pipe Round Doublewall FRP Sumps (Excavation Required)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
1.5" flex double-sided | RLX-2.0-03-R | 1.5" flex double-sided split for round doublewall sumps | EP100RF (X4) | 9" |
2" 2.5" O.D flex doublesided | RLX-2.5-03-R | 2"/ 2.5" O.D flex, double-sided split for round doublewall sumps | EP100RF (X4) | 9" |
2" 2.65" O.D flex doublesided | RLX-2.7-03-R | 2"/ 2.65" O.D flex, double-sided split for round doublewall sumps | EP100RF (X4) | 9" |
RETROFIT FITTINGS
Retrofit Fittings BLR Series
The BLR Series is used for internal, one-sided repairs to eliminate continuous leak points caused by degraded Blueline Kwik-Fit flexible entry boots in doublewall sumps. It repairs both interior and exterior leaks without excavation. The split design doesn’t require disconnecting pipe. Models available for all common FRP piping and rigid conduit. Quality FRP construction provides long term compliance solutions.
- No need to break concrete or disconnect pipe
- Models available for flat or round walls
- 30-year warranty
- Installation corrects both interior and exterior wall leaks
- AB2481 compliant
- UL2447 Listed

BLR Series Interior Installation Split FRP Retrofit Entry Fittings for Rigid Pipe Flat Doublewall FRP Sumps; Blueline Kwik-Fit Replacements (No Excavation Required)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
3/4" galvanized conduit | RF-07-04-F | 3/4" galvanized conduit, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
1" galvanized conduit | RF-10-04-F | 1" galvanized conduit, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
3/4" Rob Roy conduit | RF-07R-04-F | 3/4" Rob Roy conduit, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
1" Rob Roy conduit | RF-10R-04-F | 1" Rob Roy conduit, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
2" FRP | RF-20-04-F | 2" FRP, interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
3" FRP | RF-30-04-F | 3" FRP, interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
4" FRP | RF-40-04-F | 4" FRP, interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
BLR Series Interior Installation Split FRP Retrofit Entry Fittings for Rigid Pipe, Round Doublewall FRP Sumps; Blueline Kwik-Fit Replacements (No Excavation)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
3/4" galvanized conduit | RF-07-04-R | 3/4" galvanized conduit, interior installation split for round doublewall sumps | EP100RF (X2) | 7" |
1" galvanized conduit | RF-10-04-R | 1" galvanized conduit, interior installation split for round doublewall sumps | EP100RF (X2) | 7" |
3/4" Rob Roy conduit | RF-07R-04-R | 3/4" Rob Roy conduit, interior installation split for round doublewall sumps | EP100RF (X2) | 7" |
1" Rob Roy conduit | RF-10R-04-R | 1" Rob Roy conduit, interior installation split for round doublewall sumps | EP100RF (X2) | 7" |
2" FRP | RF-20-04-R | 2" FRP, interior installation split for roiund doublewall sumps | EP100RF (X3) | 9" |
3" FRP | RF-30-04-R | 3" FRP, interior installation split for roiund doublewall sumps | EP100RF (X3) | 9" |
4" FRP | RF-40-04-R | 4" FRP, interior installation split for roiund doublewall sumps | EP100RF (X3) | 9" |
RETROFIT FITTINGS
Retrofit Fittings INR Series
The BLR Series is used for internal, one-sided repairs to eliminate continuous leak points caused by degraded Blueline Kwik-Fit flexible entry boots in doublewall sumps. It repairs both interior and exterior leaks without excavation. The split design doesn’t require disconnecting pipe. Models available for all common FRP piping and rigid conduit. Quality FRP construction provides long term compliance solutions.
- No need to break concrete or disconnect pipe
- Models available for flat or round walls
- 30-year warranty
- Installation corrects both interior and exterior wall leaks
- AB2481 compliant
- UL2447 Listed

INR Series Interior Installation Split FRP Retrofit Entry Fittings for Rigid Pipe
Flat Doublewall FRP Sumps; Universal Replacement (not Kwik-Fit) (No Excavation)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
3/4" galvanized conduit | RF-07-05-F | 3/4" galvanized, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
1" galvanized conduit | RF-10R-05-F | 1" galvanized, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
3/4" Rob Roy conduit | RF-10-05-F | 3/4" Rob Roy, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
1" Rob Roy conduit | RF-10R-05-F | 1" Rob Roy, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
2" FRP | RF-20-05-F | 2" FRP interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
3" FRP | RF-30-05-F | 3" FRP interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
4" FRP | RF-40-05-F | 4" FRP interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
INR Series Interior Installation Split FRP Retrofit Entry Fittings for Rigid Pipe
Round Doublewall FRP Sumps; Universal Replacement (not Kwik-Fit) (No Excavation)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
3/4" galvanized conduit | RF-07-05-R | 3/4" galvanized, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
1" galvanized conduit | RF-10-05-R | 1" galvanized, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
3/4" Rob Roy conduit | RF-07R-05-R | 3/4" Rob Roy, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
1" Rob Roy conduit | RF-10R-05-R | 1" Rob Roy, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
2" FRP | RF-20-05-R | 2" FRP interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
3" FRP | RF-30-05-R | 3" FRP interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
4" FRP | RF-40-05-R | 4" FRP interior installation split for flat doublewall sumps | EP100RF (X3) | 9" |
RETROFIT FITTINGS
Retrofit Fitting RLX INR Series
The FLX INR Series is used for internal, one-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in doublewall sumps. It repairs both interior and exterior leaks without excavation. The split design doesn’t require disconnecting pipe. Models available for all common flex-pipe and semi-rigid piping. Quality FRP construction provides long term
compliance solutions.
- No need to break concrete or disconnect pipe
- Models available for flat or round walls
- 30-year warranty
- FRP sleeve seals to plastic piping
- Installation corrects both interior and exterior wall leaks
- AB2481 compliant
- UL2447 Listed

RLX INR Series Interior Installation Split FRP Retrofit Entry Fittings for Flex Pipe,
Flat Doublewall FRP Sumps; Universal Replacement (not Kwik-Fit) (No Excavation)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
3/4" flex | RLX-1.4-05-F | 3/4" flex, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
1.5" flex | RLX-2.0-05-F | 1.5" flex, interior installation split for flat doublewall sumps | EP100RF (X2) | 7" |
2" 2.5" O.D flex | RLX-2.5-05-F | 2" 2.5" flex, interior installation split for flat doublewall sumps | EP100RF (X2) | 9" |
2" 2.65" O.D flex | RLX-2.7-05-F | 2" 2.65" flex, interior installation split for flat doublewall sumps | EP100RF (X2) | 9" |
63mm O.D fusion pipe | RLX-63-05-F | 63mm O.D fusion pipe, interior installation split for flat doublewall sumps | EP100RF (X2) | 9" |
75mm O.D fusion pipe | RLX-75-05-F | 75mm O.D fusion pipe, interior installation split for flat doublewall sumps | EP100RF (X2) | 9" |
90mm O.D fusion pipe | RLX-90-05-F | 90mm O.D fusion pipe, interior installation split for flat doublewall sumps | EP100RF (X2) | 9" |
110mm O.D fusion pipe | RLX-110-05-F | 110mm O.D fusion pipe, interior installation split for flat doublewall sumps | EP100RF (X3) | 11" |
125mm O.D fusion pipe | RLX-125-05-F | 125mm O.D fusion pipe, interior installation split for flat doublewall sumps | EP100RF (X3) | 11" |
RLX INR Series Interior Installation Split FRP Retrofit Entry Fittings for Flex Pipe
Round Doublewall FRP Sumps; Universal Replacement (not Kwik-Fit) (No Excavation)
Pipe Type | Part # | Description | EPOXY REQ'D Qty | Flange Diameter |
---|---|---|---|---|
3/4" flex | RLX-1.4-05-R | 3/4" flex, interior installation split for round doublewall sumps | EP100RF (X2) | 7" |
1.5" flex | RLX-2.0-05-R | 1.5" flex, interior installation split for round doublewall sumps | EP100RF (X2) | 7" |
2" 2.5" O.D flex | RLX-2.5-05-R | 2" 2.5" flex, interior installation split for round doublewall sumps | EP100RF (X2) | 9" |
2" 2.65" O.D flex | RLX-2.7-05-R | 2" 2.65" flex, interior installation split for round doublewall sumps | EP100RF (X2) | 9" |
63mm O.D fusion pipe | RLX-63-05-R | 63mm O.D fusion pipe, interior installation split for round doublewall sumps | EP100RF (X2) | 9" |
75mm O.D fusion pipe | RLX-75-05-R | 75mm O.D fusion pipe, interior installation split for round doublewall sumps | EP100RF (X2) | 9" |
90mm O.D fusion pipe | RLX-90-05-R | 90mm O.D fusion pipe, interior installation split for round doublewall sumps | EP100RF (X2) | 9" |
110mm O.D fusion pipe | RLX-110-05-R | 110mm O.D fusion pipe, interior installation split for round doublewall sumps | EP100RF (X3) | 11" |
125mm O.D fusion pipe | RLX-125-05-R | 125mm O.D fusion pipe, interior installation split for round doublewall sumps | EP100RF (X3) | 11" |
RETROFIT FITTINGS
Coming Soon…
“Accessibility Statement” for SBravo.com
Bravo Inc. is committed to ensuring digital accessibility for people with disabilities. We are continually improving the user experience for everyone, and applying the relevant accessibility standards.
Measures to support accessibility
Bravo Inc. takes the following measures to ensure accessibility of SBravo.com:
- Include accessibility as part of our mission statement.
- Include accessibility throughout our internal policies.
- Integrate accessibility into our procurement practices.
- Assign clear accessibility targets and responsibilities.
- Employ formal accessibility quality assurance methods.
Conformance status
The Web Content Accessibility Guidelines (WCAG) defines requirements for designers and developers to improve accessibility for people with disabilities. It defines three levels of conformance: Level A, Level AA, and Level AAA. SBravo.com is fully conformant with WCAG 2.1 level AA. Fully conformant means that the content fully conforms to the accessibility standard without any exceptions.
Feedback
We welcome your feedback on the accessibility of SBravo.com. Please let us know if you encounter accessibility barriers on SBravo.com:
- Phone: +1 800 282 7286
- E-mail: orders@sbravo.com
- Visitor address: 2929 Vail Avenue Commerce, CA 90040
We try to respond to feedback within 3 Business Days.
Technical specifications
Accessibility of SBravo.com relies on the following technologies to work with the particular combination of web browser and any assistive technologies or plugins installed on your computer:
- HTML
- WAI-ARIA
- CSS
- JavaScript