circle
circle
orders@sbravo.com
ACCESSORIES

Accessories

Bravo offers a complete line of adhesives, installation accessories, & specialized tools to aid in the installation and servicing of Bravo equipment.

  • Proprietary high-quality adhesives
  • Water-blocking foams
  • Installation tools
  • Dispensing guns
  • Replacement parts
  • Sump accessories
Rack-Systems-and-Rack-Accessories

Adhesives

Part #Description
EP100 Bravo 7 oz. standard epoxy kit; use with FRP, steel, PVC, and PVDF
EP100RFBravo 7 oz. retrofit epoxy kit; use with FRP, steel, PVC, and PVDF
PE-2502-part 250 ml (8 oz.) polyethlene adhesive cartridge for bonding fiberglass to polyethylene man-gun
required
NY-260Nylon adhesive kit 260ml (9 oz.) for bonding nylon to fiberglass
PS-400 Polysulfide adhesive 400ml (12 oz.) dual cartridge with 3 stator mixing tips required man-gun
BS-01 Bostik sealant 1100 black polyurethane base sealant
T-MG400 Manual caulk gun for PE-250 and PS-400

Lamination and Paste kits

Part #Description
K-401Fiberglass laminating kit for 1 interior and exterior joint 1 gallon, 45' FRP mat
K-402Fiberglass laminating kit for 1 interior and exterior joint 2 gallon, 90" FRP mat
K-421Heavy duty paste kit for interior and exterior joint, sharpe transition edges, 1 gallon
K-410Paste kit for interior and exterior joint, smooth transitions, 1 gallon
K-410.5 Paste kit for interior and exterior joint, smooth transitions, 1/2 gallon

Slurry kits

Part #Description
EP-S1.0 Epoxy slurry to join Bravo base and top for singlewall application, 1 gallon
EP-S.75Epoxy slurry to join Bravo base and top for singlewall application, .75 gallon
EPC-S1.0 Pour channel epoxy slurry to join Bravo doublewall base and top (must use with backerrod), 1 gallon

Water-blocking Foam and Dispensing Gun

Part #Description
WB-01Water block 20 X expanding foam single cartridge
WB-20 Water block 20 X expanding foam case of 20 cartridges
WB-GWater block dispensing gun

Tool

Part #Description
T-400Basic laminating tool kit; rollers, chamfer roller and mixing bucket
T-3R3” chamfer roller
T-6R6” chamfer roller
T-FS-SG Heavy-duty air grinder - 1" 5/8” Arbor; sanding discs not included
T-GBLatex grout bag used with doublewall pour channel
T-MG400Manual caulk gun for PE-250 and PS-400
T-TBF-SSand tool only for 4" tank bung fitting
T-WR3Wrench for B-18 compression nut - 1/2" socket
K-900Hydro-VAC filling kit for doublewall sump
T-TCI TCI retrofit tightening tool
T-TCI VPTCI vapor penetration too
T-TCI CUB 2000 TCI retrofit tightening tool

Sensor Holders

Part #Description
SH-UDCUDC sensor holder kit
SH-TSTank sump sensor holder kit
SH-TRSTransition sump sensor holder kit

Riser Adaptors and Installation Clamps 4″ and 6″

Part #Description
B-TBF-4 4" NPT fiberglass tank bung fitting with machined threads, 1 EP-100RF included
B-TBF4-D4" NPT fiberglass tank bung fitting with machined threads, 2 EP-100RF included
B-TBF-66" NPT fiberglass tank bung fitting with machined threads, 2 EP-100RF included
T-TBF4HD compression clamp for B-TBF-4; 1 per fitting
T-TBF6 HD compression clamp for B-TBF-6; one per fitting

Manometers for VPH Doublewall

Part #Description
MS-2LExtended clear manometer 15" tall manometer for electronic sensor; B1000, 8000, 9000 series
MS-2SStandard clear manometer for single point sensor 8" height
MS-ATMAtmospheric manometer for UDC
BK-4022" Sensor manometer bracket for DW tank sump
BK-500.51/2" Atmospheric manometer bracket for DW B500, 600, 8000 & 9000 series
BK-502 2" Sensor manometer bracket for DW B500, 600, 8000 & 9000 series

UDC Stabilizer Bar and Bracket Assemblies

Part #Description
BK-1015Boss-mount bracket for B1000, Ovation, Advantage Narrow, Vista
BK-1017Boss-mount bracket for B1000 Encore / Helix models
BK-1011Boss-mount bracket for B1000 Atlas model
BK-7000Adjustable stabilizer bracket - Boss - 1-1/2” or 2” valves for B7000; also a satellite bracket
BK-8000 X and Y axis adjustable bracket for B8000/9000; Boss or U-Bolt mount
BK-A6000Boss mount bracket for A6000 product valves
BK-A6000-SSX and Y axis adjustable stainless steel bracket for A6000; Boss mount

Installation Clamps for Round FF Series Entry Fittings and Sanding Kits

Part #Description
T-FC-10One pair of clamps for 3/4" and 1" conduit fittings
T-FC-20 One pair of clamps for 2" FRP and 2" LCX fittings
T-FC-30One pair of clamps for 3" FRP and 3" LCX fittings
T-FC-40 One pair of clamps for 4" FRP and 4" LCX fittings
T-FS-10 Sanding kit for 3/4" and 1" conduit fittings
T-FS-20Sanding kit for 2" FRP and 2" LCX fittings
T-FS-30Sanding kit for 3" FRP and 3" LCX fittings
T-FS-40 Sanding kit for 4" FRP and 4" LCX fittings
BK-B2X and Y axis adjustable stabilizer bracket for vapor valve

Pipe Offsets

Part #Description
MO-4001-1/2” offset, 1-1/2” NPT male x 1-1/2” NPT female
MO-401 1” offset, 1-1/2” NPT male x 1-1/2” NPT female
MO-4022” offset, 1-1/2” NPT male x 1-1/2” NPT femal
MO-4033” offset, 1-1/2” NPT male x 1-1/2” NPT femal

Conversion Frame Accessories

Part #Description
EN-DPDeflector plate kit for Encore dispenser; set of 2
OV-DP Deflector plate kit for Ovation dispenser; set of 2
DT-CU-380 Drip tray Encore dispenser Universal conv frame
DT-CU-250Drip tray Ovation dispenser Universal conv frame

FEB Series Flexible Entry Boots for Singlewall Steel Sumps
Flat Sump Wall

Pipe typePart #Description
3/4" or 1" galvanized
conduit
B-173/4", 1" galvanized conduit, single-sided flexible entry boot
3/4" or 1" galvanized
conduit
B-17-D 3/4", 1" galvanized conduit, double-sided flexible entry boot
3 x 2" FRPB-323x2" FRP, single-sided flexible entry boot
3 x 2" FRPB-32-D3x2" FRP, double-sided flexible entry boot
3" FRPB-333" FRP, single-sided flexible entry boot pass-through
3" FRPB-33-D 3" FRP, double-sided flexible entry boot pass-through
EP100 Bravo 7 oz. standard epoxy kit; use with FRP, steel, PVC, and PVDF

Replacement Transition Sump Covers

Part #Description
L-503Replacement steel cover for B500 large
L-501Replacement steel cover for B500 small
L-603Replacement galvanized diamond plate lid for B600 large
L-601Replacement galvanized diamond plate lid for B600 small
L-701Small complete lid with channel gasket and sealant for B700
L-703Large complete lid with channel gasket and sealant for B700
L-711-12Penetration-side 12" lid with channel gasket and sealant for small and large B71X
L-711-20Traffic-side 20" lid with channel gasket and sealant for small B711
L-713-36Traffic-side 36" lid with channel gasket and sealant for small B713

B2000 Accessories

Part #Description
B2K-PB2000 float cup plug
B-18-NG-1.5-CK Compression nut 1-1/2" and gasket 1-1/2" kit; compression nut 2" and gasket 2x1-1/2" kit
B1-BOSS-CVapor shear valve Boss-mount - Celcon; CARB approved
B1-BOSS-ULVapor shear valve Boss-mount - cast iron; UL Listed
B1-TOP-CReplacement shear top - Celcon; CARB approved
B1-TOP-UL Replacement shear top - cast iron; UL Listed
B1-U-CVapor shear valve - U-Bolt Celcon; CARB approved
B1-U-ULVapor shear valve - cast iron; UL Listed

Compression Fittings for Transition Sumps

Part #Description
VFR-2Field retrofit MNPT adapter and AST compression fitting for 2" and 1-1/2" risers
VFR-3Field retrofit MNPT adapter and AST compression fitting for 3" risers
EBSRigid electrical bulkhead w/ES1 reducer for 1" & 3/4" conduit

Rack System

Part #Description
RS-501Small rack for 1, 2 or 3 vents; includes hardware, freight not included
RS-503Large rack for 4 or 5 vents; includes hardware, freight not included
RS-HARDHardware kit for rack system, clamps, hex bolts, washers and nuts

Replacement Gaskets

Part #Description
G-501 Replacement gasket for B600 foam 1"x1/4" gasket with adhesive tape
G-601 Replacement gasket for B600 foam 1"x1/4" gasket with adhesive tape
G-640Replacement gasket for B600 commercial 1"x1/4" gasket with adhesive tape

Replacement O-Rngs

Part #Description
OR-SL32 Replacement O-Ring for 32" Snap-Lock Lid
OR-SL36Replacement O-Ring for 36" Snap-Lock Lid
OR-SL39 Replacement O-Ring for 39" Snap-Lock Lid
OR-MW36 Replacement O-Ring for 36" Manway
OR-MW42Replacement O-Ring for 42" Manway
OR-GREASE Grease for O-Ring

orders@sbravo.com
ACCESSORIES
arrow Go Back
circle

Coming Soon…

circle
New Installation Guides Coming Soon

Please Feel Free to Contact Customer Service

800.282.7286

circle

circle








circle

“Accessibility Statement” for SBravo.com

Bravo Inc. is committed to ensuring digital accessibility for people with disabilities. We are continually improving the user experience for everyone, and applying the relevant accessibility standards.

Measures to support accessibility

Bravo Inc. takes the following measures to ensure accessibility of SBravo.com:

  • Include accessibility as part of our mission statement.
  • Include accessibility throughout our internal policies.
  • Integrate accessibility into our procurement practices.
  • Assign clear accessibility targets and responsibilities.
  • Employ formal accessibility quality assurance methods.

Conformance status

The Web Content Accessibility Guidelines (WCAG) defines requirements for designers and developers to improve accessibility for people with disabilities. It defines three levels of conformance: Level A, Level AA, and Level AAA. SBravo.com is fully conformant with WCAG 2.1 level AA. Fully conformant means that the content fully conforms to the accessibility standard without any exceptions.

Feedback

We welcome your feedback on the accessibility of SBravo.com. Please let us know if you encounter accessibility barriers on SBravo.com:

We try to respond to feedback within 3 Business Days.

Technical specifications

Accessibility of SBravo.com relies on the following technologies to work with the particular combination of web browser and any assistive technologies or plugins installed on your computer:

  • HTML
  • WAI-ARIA
  • CSS
  • JavaScript
circle

Font Resize