UNDERSTANDING BRAVO PART NUMBERS
You must first find out what brand and model dispenser you are using.
When Found, a Bravo Systems Model Number addition is provided. Example: "x635-3"
The "x" must be replaced by the Model Series number.
Example: If the dispenser is to be placed on a B9000 Series box, The "9"
replaces the "x" and you have "B9635-3..." etc.etc.. followed by
Material / Inlet / and Size designations. This is found in the same row as
your Model Number Addition.
NOTE: Basic Bravo Part numbers are shown and priced in generic form.
YOU must add the model number addition that matches your New dispenser, to complete the product that must be ordered.
S. Bravo Systems assigns a number to each
Dispenser Manufacturer in its database.
For your convenience, these are listed below.
Brand # |
Brand it Designates |
x2xx |
Wayne Dresser |
x3xx |
Gilbarco / Southwest |
x4xx |
Bennett |
x5xx |
Tokheim |
x6xx |
Gasboy |
x7xx |
A.O. Smith |
x8xx |
Schlumberger |
(Brand # placed in example model number)
B-9865-F3L-D-AB |
Bravo Systems Nomenclature is as follows:
"F1S" Stands for Fiberglass, 1-Inlet, Small size sump
"F2M" Stands for Fiberglass, 2-Inlet, Medium size sump
"F3L" Stands for Fiberglass, 3-Inlet, Large size sump
Etcetera...
"P1S" Stands for Poly (Denoting a X-Link Polyethylene Sump), 1-Inlet, Small size sump
Etcetera...
"M1S" Stands for Metal (Steel), 1-Inlet, Small size sump
"M1M" Stands for Metal (Steel), 1-Inlet, Medium size sump
Etcetera...
The beginning "B-" simply stands for Bravo. This pre-letter code will later be expanded.
The adder "-B" towards the end of a part number denotes a flat-bottom sump, lacking the Bravo Float-Trip system. As mechanical Float-Trip actuation systems are phased out of B7000, B8000 and B9000 series UDC's,
The adder "-D" denotes a DoubleWall part, product or system.
The adder "-D-AB" denotes DoubleWall and AB-2481 Compliant, a California-Regulated standard.
NOTE: -D and -D-AB are the same! Every DoubleWall product is fully AB-2481 compliant even though some part number structures may only include one or the other.
The adder "-EO" denotes a provision for the Electrical Offset option.
The adder "-T" denotes that the part or assembly provides a Test Port, usually a schrader type.
The adder "-S" denotes that the product is Split, which typically refers to our Retrofit line of F-Series all-fiberglass entry fittings which are the preferred alternative to a split flexible repair boot.
|
